In addition to the precision tables previously described in this section, Daedal also offers additional products which enhance the overall
capability of this product family. The table products shown are offered to expand performance features of the group, and are used extensively as the mechanical subsystem in OEM applications. The motor, drive and
controls are presented to increase awareness of Parker’s electrical subsystems which are incorporated into the control element of a system.
Motors, Drives and Controls
The Gemini GV is a compact, low-cost, digital servo drive available in five power levels for producing up to 20 Amps peak current, or up to 14.7
kW of peak power. The Gemini GV is easily configurable via RS232/485 using Compumotor’s Motion Planner TM on a PC, or Pocket Motion Planner TM on a Window’s TM CE-based palm PC.
From lower cost steppers to high performance servos, Parker can provide the right drive source for your system.
The revolutionary 6K Controller is an embedded motion controller or stand-alone motion controller built into one convenient package. The 6K is a multi-axis motion
controller capable of solving basic to complex motion control applications including: pick-and-place, packag-ing, following, cam profiling and hundreds of others. The 6K
utilizes Ethernet communications to allow high speed connections to many different products such as PLCs, HMIs, I/O modules and vision systems.
406LN Square Rail Linear Tables
The 406LNs are proven performers where aggressive acceleration and exceptional accuracy are required in moving light to heavy loads over travels up
to 24 inches. They have been the tables of choice for OEMs and integrators involved with semiconductor processing, PCB staking, and part insertion. They can be provided with or without linear encoder feedback, and
are ready for direct hook-up with NEMA 23 or 34 frame size motors.
Features:
Travel Range:
24 Inches
Load Capacity:
600 lbs.
Maximum Speed:
12 in./sec.
Duty Cycle:
100%
Repeatability:
+/-0.00005 in.
Drive Type:
Ground Ballscrew
Low Profile X-Y Inspection Positioners
These two axis units provide a very low profile (under 2 inches) making them ideal for height restricted applications such as microscope inspection.
They have a square rail bearing system and precision ballscrew drive and have been utilized in other applications including wafer inspection and handling, mask & die inspection, and cell counting &
analysis.
Features:
Travel Range:
12 x 12 Inches
Load Capacity:
30 lbs.
Maximum Speed:
10 in./sec.
Duty Cycle:
100%
Repeatability:
+/-0.00008 in.
Drive Type:
Ground Ballscrew
600CT Cross Roller Table
The massive cross roller bearings utilized in the 600CT tables make them ideal for use in applications such as surface finish inspection and
semiconductor testing where extremely smooth, highly precise linear motion is required. The cross rollers permit load capacities comparable to square rail tables to be provided without the low level mechanical noise
that is associated with the square rail design.
Features:
Travel Range:
18 Inches
Load Capacity:
650 lbs.
Maximum Speed:
10 in./sec.
Duty Cycle:
100%
Repeatability:
+/-0.00008 in.
Drive Type:
Ground Ballscrew
500PD Round Rail Table
The 500PD combines a round rail bearing system with a steel reinforced timing belt drive to high speed linear translation up to 120 in/sec and
positional repeatability of +/- 0.004 inches. They have been utilized by OEMs for uses in part transfer, pick-and-place, and high speed scanning.
Motors, Drives and Controls
The revolutionary 6K Controller is an embedded motion controller or stand-alone motion controller built into one convenient package. The 6K is a multi-axis motion
controller capable of solving basic to complex motion control applications including: pick-and-place, packag-ing, following, cam profiling and hundreds of others. The 6K
utilizes Ethernet communications to allow high speed connections to many different products such as PLCs, HMIs, I/O modules and vision systems.
